Click image to view full size image
Follicular Unit Extraction Hair Restoration Device
Model: L-16V
Specification:
Rotating Speed Range:2000-2500RPM
Weight:150g (including battery)
Size:183*20mm
Punch:0.8mm 0.9mm 1.0mm
Autoclavable to 132ºC
The extractor is suitable for all kinds of hair transplant clinical application,not only can increase the follicles dissociation rate so that increase the obtained rate,saving operation time,but also reduces the cost.
L-16V extractor is made of medical grade alloy material, can be autoclavable.Put into the autoclave sterilizer cabinet after remove the battery and rear cover switch.It's ergonomic design,enhance the flexibility,increase the follicles dissociation rate one time in a short time.
Usage Method:
1.Angle:use the magnifying glass in the operation,aim the follicle,adjust the angle of punch,make the punch and hair growth angle parallel,insert the punch into the scalp 2.5-3.0mm then extract quickly,that is a free follicle.
2.Depth: the best depth is 2.5-3.0mm, avoid causing trauma to the hair loss patients.
3.Density:make proper extraction in the hirsute areas,avoid serious outcome in hair recovery.
Sterilization Method:
1.remove the battery and rear cover switch,wipe the handle with alcohol cotton
2.put in the sterilization bag
3.sterilize in autoclave less than 132ºC,such as 20 minutes with 121ºC,or 15 minutes with 132ºC.
Packing list:
1. electric handle 1 pcs
2.punch 0.8mm 1 pcs,0.9mm 1 pcs,1.0mm 1 pcs
3.tweezer 1 pcs
4. knife handle and blade
5.battery 2 pcs
6.charger 1 pcs
Model: L-16V
Specification:
Rotating Speed Range:2000-2500RPM
Weight:150g (including battery)
Size:183*20mm
Punch:0.8mm 0.9mm 1.0mm
Autoclavable to 132ºC
The extractor is suitable for all kinds of hair transplant clinical application,not only can increase the follicles dissociation rate so that increase the obtained rate,saving operation time,but also reduces the cost.
L-16V extractor is made of medical grade alloy material, can be autoclavable.Put into the autoclave sterilizer cabinet after remove the battery and rear cover switch.It's ergonomic design,enhance the flexibility,increase the follicles dissociation rate one time in a short time.
Usage Method:
1.Angle:use the magnifying glass in the operation,aim the follicle,adjust the angle of punch,make the punch and hair growth angle parallel,insert the punch into the scalp 2.5-3.0mm then extract quickly,that is a free follicle.
2.Depth: the best depth is 2.5-3.0mm, avoid causing trauma to the hair loss patients.
3.Density:make proper extraction in the hirsute areas,avoid serious outcome in hair recovery.
Sterilization Method:
1.remove the battery and rear cover switch,wipe the handle with alcohol cotton
2.put in the sterilization bag
3.sterilize in autoclave less than 132ºC,such as 20 minutes with 121ºC,or 15 minutes with 132ºC.
Packing list:
1. electric handle 1 pcs
2.punch 0.8mm 1 pcs,0.9mm 1 pcs,1.0mm 1 pcs
3.tweezer 1 pcs
4. knife handle and blade
5.battery 2 pcs
6.charger 1 pcs